|
|
|
|
|
Optical probe
The Sonda 5 optical probe is intended for local communication with meters, tariff devices, communicators, as well as data recorders, especially for: ME16x, MT35x, MT37x, MT4xx, MT8xx, TE4xx, TE3xx, P2x, TKM8
|
|
 |
|
It is designed in accordance with the IEC61107 standard. It is equipped with a 9-pin SUB-D female connector for connection to a computer. |
|
|
|
|
|
RS232 Connector:
9-pin SUB-D female connector
RxD - pin 2
TxD - pin 3
DTR - pin 4
GND - pin 5
|
Power supply: The optical probe does not need any external power supply. It is powered by a DTR signal from the computer RS232 port. |
Baudrate: Up to 57600 bps
Note: Baudrate can be limited on the meters! |
Wavelength: 880 nm |
Dimensions: SquareSquare 34 x 47 x 13 mm, with additional cylindrical interface with 31 mm diameter and 7 mm height |
Cable length: 2 m/5 m |
Magnet attraction:
Force:
F = 7 N (a contact on the steel panel)
F = 1.8 N (at a distance of 2 mm from the steel panel) |
Optical elements are protected with an infra-red filter against the influence of daylight. |
Download drivers for Optical probe Sonda 5
|
|
|
|
 |
